Car Ferry Boat

Posted on 22 January 2025 by yonetici in 3d models, General, Ships, Vehicle Models, Vehicles | Leave a comment

This article includes a 1.2m long 3d printable ferryboat model. A free version is also available.

Flatbed car ferry boats are specialized vessels designed primarily for the transport of vehicles and cargo, with technical specifications tailored to their operational requirements. They feature a flat, unobstructed deck, often made of reinforced steel or aluminum, capable of handling heavy loads such as trucks, buses, and industrial equipment. These decks are supported by a robust hull structure designed for stability and durability, ensuring safe operation even under challenging marine conditions.

Continue reading for more info and renderings. Your free STL file is at the end of the article. Get it and print your own car ferry.

If you want to proceed to our special STL file pack containing 70+ separate high rez parts,

CLICK HERE<——————-.

Most flatbed ferries are equipped with roll-on/roll-off (RoRo) ramps at the bow and stern, with hydraulic or electric mechanisms enabling efficient deployment. The load capacity of these vessels varies widely; smaller ferries can handle 10–20 vehicles, while larger ferries, such as those used for industrial or coastal operations, can carry over 100 vehicles or several hundred tons of cargo. Vehicle lanes are often marked on the deck to optimize space utilization and ensure safe loading.

Propulsion systems typically rely on diesel engines, with power outputs ranging from 1,000 to over 10,000 horsepower, depending on the vessel size and intended use. Modern ferries may include dual-fuel or hybrid-electric propulsion systems to reduce emissions and improve fuel efficiency. The vessels are fitted with advanced navigation systems, including GPS, radar, and electronic chart display and information systems (ECDIS), to enhance operational safety and efficiency.

two different options for the bridgehouse roof

The speed of flatbed ferries generally ranges from 10 to 20 knots, depending on the vessel size and route length. For safety and maneuverability, they are often equipped with bow thrusters or azimuth propulsion units, enabling precise control in tight docking situations. Many ferries also feature watertight compartments and ballast systems to maintain stability, especially when transporting uneven loads.

telegraphs are fixed on deck while the wheel and the wheel support are replaceable.

Flatbed ferries adhere to international maritime safety regulations, such as those outlined by the International Maritime Organization (IMO), and are designed to withstand environmental challenges like strong currents, waves, and winds. In terms of dimensions, typical lengths range from 30 to 120 meters, with a beam width of 10 to 25 meters and a draft of 2 to 5 meters, depending on the water depth and port facilities they serve.

pulley for operating the rudder is attached on the left.

We have a file pack for you to enable build your 3d printed Ferry. It consists of more than 70 parts and It can be used as a display model or you can convert it to a remote controlled model ship. The model will be 1.2ms long including the ramps.

Details are below. You can click all pictures to enlarge.