3d printable outboard project

Posted on 25 April 2021 by yonetici in Boats, General, Outdoor, Vehicle Accesories, Vehicles | Comments Off

This is a new project. It will be an electric powered outboard motor for small boats when complete.

So far I’ve made the propeller only and sharing it right away.

Pages: 1 2

Bike handlebar switch designs

Posted on 18 April 2021 by yonetici in Bike Accesories, General, Outdoor, Products, Puch | Comments Off

I’ve made some switch designs which can be used in all kinds of bikes with 22 mm handlebars.

various switch and potentiometer combinations are possible

Citroen 1CV inspired tot rod car body

Posted on 25 February 2019 by yonetici in Antique Cars, General, Outdoor, Plywood tot rods, Toys, Vehicles | Comments Off

CAM files for the tot rod kids car bodyshell inspired from citroen 2cv prototype. The body can be used for DIY hobby projects, building your child a ride etc.

Can be made from sheet material cut to specs with a laser cutter, water jet or similar other methods. Designed for 12mm thick plywood. Requiress one and half standart 1220x2440mm plywood sheet.

Mini mp3 player holder for bikes.

Posted on 18 December 2013 by yonetici in Bike Accesories, Outdoor, Products | Comments Off

This is a new mounting accesory for mini cube mp3 players which are abundant on the market. These nice and very cheap mp3 players can be fixed on any bike handle or 1in dia pipe with this design. Tested and approved, works quite good. A little piece of rubber, tire patch or silicone glue placed and dried before assembly will make the device hold its groud firmly while supporting your mp3 player.

Accesory on my Strida Bike, holding the cube mp3 player.

view from below, the multicolor led of the player shines thru the semitransparent abs body.

Continue reading to download the STL file for 3d printing this accesory.

Pages: 1 2 3

Dot Matrix Hand/Bike Torch.

Posted on 28 November 2013 by yonetici in Bicycles, Bike Accesories, General, Lighting, Outdoor, Products, Proteus Projects, Vehicle Accesories, Vehicles | Comments Off

My recent project is a first in the world. As far as i’ve searched, I didnt be able to find a similar product. See the video for its operation details.

STL files for the body and bike handlebar mount kit is included in the article.

5×5 dot matrix display & lighting leds. shown with accesory for bicycle handlebar mounting

Solar Panel Mount for bikes.

Posted on 13 November 2013 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Vehicle Accesories, Vehicles | Comments Off

This product is aimed to be used on bikes, but can be used elsewhere where a small solar panel attachment is needed. The part is quite strong & sturdy , able to carry up to 1kg with ease.

on the strida, powering my mp3 player torch. A usb cable runs from panel to product for power transfer.

Pages: 1 2

Bike computer with graphics screen

Posted on 22 May 2013 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Proteus Projects, Puch, Timing, Vehicle Accesories, Vehicles | Comments Off

I’ve designed a complete new hardware & software for the bicycle comp that I’ve published some months ago. This one has a 128X64 monochrome graphics screen instead of the 16×2 character display of the former one.

The product is held on the handlebar by two elastic o-rings

this has got real time clock as well as the temperature sensor like the old one. But all data can either be shown fully digital or two different analog display modes.

Mp3 player holder for bikes

Posted on 21 May 2013 by yonetici in General, mp3, Music, Outdoor, Products, Vehicle Accesories | Comments Off

I’d published a product for mounting mp3 players to bikes some months ago. Recently I’ve resized it, converted its locking mechanism to a double lock for added strength and printed one, by using an UP printer. I’ve assembled it to my folding bike with the mp3 player that i’ve bought from the market for just 14$. The design turned out to be nice, performed its duty well, holding the mp3 player in place at the same time directing its sounds towards the rider. Though the speakers of the player were at the sides, the sound was being distributed to the sides and music was a bit difficult to hear without redirection.

now sound is good. The STL files are at the end of the article for the ones who want to print their own product.

Bicycle Computer 16×2 LCD.

Posted on 22 December 2012 by yonetici in Bicycles, Bike Accesories, Outdoor, Products, Proteus Projects, Puch, Timing, Vehicle Accesories, Vehicles | Comments Off

This is a bicycle computer product with 16×2 LCD screen, real time clock, temperature sensor, light sensor, total & trip distance measurement, even a knight rider led display that changes its swing speed according to the bike’s speed. A very fun project.

The prototype made on multiholed prototyping board

Flashing rear light for bicycles.

Posted on 17 December 2012 by yonetici in Bike Accesories, Outdoor | Comments Off

A product powered by pic 12F675 microcontroller. The circuit drives 6-8 leds separated into two groups which can be red and blue, imitating a police type rear-front flasher.